The distribution pipes and side panels are SF-0 BLUE flat hoses with three-strand braided mesh reinforcement under tension.
They offer greater resistance and uniformity throughout the length of the hose being easily transportable.
For modules A and B: nominal diameter: 60 mm USA.
Resistant to ultraviolet rays and aging.
The flat hose is supplied with quick coupling accessories, guaranteeing mechanical and hydraulic sealing. The side-bearing pipes are distributed with connection accessories at a separation of 1.5 m. Upon request, there is the possibility of making the connection with separations depending on the crop frame present in the area.
The bypass and connection to the irrigation system is adapted to both the tape and the thick-wall drip pipe. It would only be necessary to change the intermediate piece according to the type of irrigation pipe chosen.
Similarly, the tea is easily convertible to the elbow, allowing the connection of a single side by side. Supplied with irrigation tape of 8 MIL or 12MIL with flat dropper,
Qn: 1.3 l / h at 1 bar; separation between emitters: 30 cm., flow per meter of 3.9 l / h / m.
From 0.2 bar the tape starts to water, however, in order to achieve an adequate irrigation uniformity as well as an efficient irrigation, it is recommended that the working pressure range of the belt be from 0.7 to 1 bar, fixing as a minimum limit 0.4 bar.
For modules A and B, it is supplied with a 3 “filter and mounting accessories. Flat 60mm hose for driving, Maximum working pressure: 4 bars. Flat 60mm perforated hose for distribution to drip branches, Maximum working pressure: 2.5 bar. It is recommended not to exceed 2.5 bars of pressure in the sections of flat hose with inserted accessories and 1.5 bars in the irrigation tape.
Otherwise the guarantee will lose its validity. For the larger surface kits (Module C), pressure reducers will be provided to ensure the proper functioning of the irrigation belt without submitting it to pressures higher than the recommended work. As well as flat hose and accessories of connection of the diameter adapted to the required flow for each case.
• VERSATILE: For uneven, scattered surfaces and for different sowing frames. With application to crops such as corn, bean, pepper, watermelon, melon, coffee, cocoa, tobacco, fruit, forest, etc.
• ADJUSTABLE: To sources of supply, channels, reservoirs, wells. Allows the use of tape or integrated drip tubes, sprinklers or micro sprinklers. To adjust to different doses of irrigation based on the water demand of the mentioned crops.
• AUTONOMY: Constructed with quick attachments of its main components and therefore easily removable and transportable.
• DURABILITY: Manufactured with virgin materials based on international standards, ensuring greater durability of all its components.