<\/p>\n
\u2022 Dry quadrant with magnetic transmission device.<\/p>\n
\u2022 High quality components and materials to guarantee reliable and long-lasting performance, low pressure drop and long use life.<\/p>\n
\u2022Accuracy in measurement conforms to GB \/ T 778 to 2007, ISO 4064 to 2005 Standard.<\/p>\n
\u2022Interchangeability of the dial and clock between the meters in this line, without the need to disassemble the meter from the pipe for easy maintenance.<\/div>\n\t\t\t\t<\/div>\n
\u2022<Humidity:<93%<\/p>\n
\u2022 Service pressure: \u2264 1.0MPa<\/p>\n
\u2022Pressure drop: \u22640.1MPa<\/p>\n
\u2022The liquid must meet national drinking water standards.<\/div>\n\t\t\t\t<\/div>\n
By design, Woltmann meters are sensitive to the inflow profile, so the turbulence produced by the accessories or valves in the vicinity of the meter must be taken into account.<\/p>\n
It is advisable to install a straight pipe section of 10xDN* in front of the meter and a section of 5xDN * behind it, for dimensions of 2\u201d up to 12\u201d (*DN= Nominal Diameter of the valve in inches).<\/div>\n\t\t\t\t<\/div>\n
\u2022It is read in the following order: main (top-centre), right wheel (centre-right), down wheel (centre-down) and small marker (botton-left)<\/p>\n
Each marker has multiplication factors, which are always multiples or fractions of 10. If it is empty, we assume that the factor is X1. we assume that the factor is X1.<\/p>\n
\u2022To obtain a correct reading you have to follow the order of the second point and multiply each marker by the corresponding factor and add the 4 markers together at the end.<\/p>\n
\u2022The final reading is always obtained in cubic meters (unit of volume).<\/div>\n\t\t\t\t<\/div>\n","protected":false},"excerpt":{"rendered":"
The Woltmann flowmeter is used to measure the total amount of cold or hot water consumed in civil, industrial and mining applications.<\/p>\n
<\/p>\n