SELF-CLEANING AUTOMATIC MESH HORIZONTAL ORON FILTER
ORON IRRIGATION FILTERS
Thanks to their automatic cleaning equipment with a hydraulic system of suction nozzles, ORON filters do not need to interrupt the filtration phase for cleaning, so pressure losses in the system during the washing process are avoided.
Simpler equipment that gains in efficiency, specifically designed to meet the needs of the most demanding systems.
With more than 25 years of experience in product development in the sector.
Personalised advice
Our technical sales team will solve your doubts or needs.
Technical information:
*In the mobile version, swipe to the right to view the entire table.
SELF-CLEANING AUTOMATIC MESH HORIZONTAL ORON FILTER | |||||
MODEL | CONNECTION | MAX. WORKING PRESSURE | MAX. FLOW RATE | FILTERING SURFACE | CODE |
(“) | (bar) | (m³/h) | Fine mesh (cm²) | Filter | |
ORH4” | 4" FLANGE | 10 | 110 | 4800 | 461610 |
ORH6” | 6" FLANGE | 10 | 180 | 4800 | 461748 |
ORH8” | 8" FLANGE PN10 | 10 | 320 | 7200 | 461749 |
ORON FILTERS DESCRIPTION
The filters can work alone or in a bank (if the flow rates are very high or the water contains a large amount of dirt and requires an increased filtration surface). The filter comes fully equipped, you just have to install the inlet, outlet and drainage connections, and assemble the other elements supplied according to specifications.
Unlike ORVs, they feature removable prefilters with large surface areas, whose function is to retain large particles that can affect the internal parts of the equipment. ORH models are equipped with large filtration surfaces, making them ideal for use at high flow rates.
ORON FILTERING PHASE
The water passes into the filter element, so that the dirt with a size greater than that established by the degree of filtration is retained on the inner face of the mesh. The filtered water exits the outlet of the filter in optimal conditions for its use, preventing damage from being caused to the system.
*Maximum operating pressure: 10 bar
ORON FILTER AUTOMATIC SIMULTANEOUS CLEANING PHASE
From a pressure difference stipulated on the controller (recommended differential: 0.5 bar) the filter cleaning cycle starts automatically, which consists of activating a set of nozzles attached to a collector (washing unit) that siphon, while scanning the mesh, the dirt stuck to the mesh, expelling it to the outside.
* Minimum pressure for optimal cleaning: 2 bar
