HYDROCYCLONE FILTER
HYDROCYCLONE IRRIGATION FILTERS
The hydrocyclone enables sand and other heavier particles to be separated from water. As a result of the centrifugal force, the solid particles move towards the wall of the cone in a downward spiral thanks to the force of gravity, until they fall into the lower collecting tank where they are stored.
The clean water exits the hydrocyclone through the pipe at the top and the solid particles accumulated in the bottom tank are removed regularly.
Available up to PN16.
With more than 25 years of experience in product development in the sector.
Personalised advice
Our technical sales team will solve your doubts or needs.
Technical information:
*In the mobile version, swipe to the right to view the entire table.
HYDROCYCLONE FILTER | |||
CONNECTION | MAXIMUM FLOW | CODE | |
(“) | (m³/h) | ||
1½" FEMALE THREAD | 13 | 458419 | |
2" MALE THREAD | 21 | 457257 | |
3" SHORT FLANGE | 35 | 458420 | |
3" FLANGE | 50 | 460876 | |
4" FLANGE | 60 | 458423 | |
HYDROCYCLONE FILTER INSTALLATION
HYDROCYCLONE FILTER OPERATION
•The maximum operating pressure must not exceed 8 bar.
• Recommended pressure drop: 0.2 bar- 0.5 bar (Higher pressure drop can lead to increased erosion and smaller pressure drop reduces the separation efficiency)
